Hi,
While I was installing application from http://www.polar.fi/en/support/downloads?product=&category=Software&documenttitle=Polar+Precision+Performance+SW+v.4+free+download&document=/gip/PKBStoGIP.nsf/web_cat/C225742500419A8AC22572B200242F37 I had a CrossOver termination (http://www.mojdietetyk.pl/cross_over/cross_over.txt) and when I run Polar I get application Icon but no Polar application window (http://www.mojdietetyk.pl/cross_over/cross_over.jpg) . Please, help. Any advices would be most welcome😊
My Mac configuration:
Model: MacBook3,1, BootROM MB31.008E.B02, 2 processors, Intel Core 2 Duo, 2.2 GHz, 4 GB
Graphics: kHW_IntelGMA965Item, GMA X3100, spdisplays_builtin, 144 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR2 SDRAM, 667 MHz
Memory Module: BANK 1/DIMM1, 2 GB, DDR2 SDRAM, 667 MHz
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.38.9)
Bluetooth: Version 2.1.0f17, 2 service, 1 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: FUJITSU MHY2160BH, 149.05 GB
Parallel ATA Device: MATSHITADVD-R UJ-857E, 4.18 GB
USB Device: Built-in iSight, Micron, high_speed, 500 mA
USB Device: Apple Internal Keyboard / Trackpad, Apple Computer, full_speed, 500 mA
USB Device: IR Receiver, Apple Computer, Inc., low_speed, 500 mA
USB Device: Bluetooth USB Host Controller, Apple, Inc., full_speed, 500 mA